Field Sprayer Cleaning System V1.0.0.0

With this mod, you need to clean your sprayer after using it if you want to switch products. Keeping the same product is possible, but changing products takes time. The system should work with every sprayer, even though not all of them have been tested.

Semi-Realistic and Realistic play the same way. The only thing that changes is how long it takes. The tests worked perfectly, and you can report errors so they can be adjusted.

Features

• Cleaning required:
  Once your sprayer is empty, it is still dirty. You can carry on with the same product, but a product change means cleaning it.
• Preparation:
  First empty the spraying agent completely. Then start the engine and unfold the boom all the way to rinse.
• Filling with water:
  Drive to a suitable water source and press R. One cycle needs 15% of the tank capacity, with filling stopping on its own.
• Cleaner:
  Buy 2,000-litre cleaner IBCs in the shop for €10,000, then place them next to your sprayer.
  Work through three cycles in order: fresh water, water with cleaner, and fresh water again.
• Cleaning:
  CTRL + ALT + P starts or pauses the cleaning process. You handle the filling and start of every cycle yourself. The next cycle will not start automatically.
• Select mode:
  Pick the mode in the options or press CTRL + ALT + M.
  Realistic takes 7 minutes of circulation plus 8 minutes of emptying per cycle, and is followed by spraying out.
  Semi-realistic uses 20 seconds of circulation plus 30 seconds of emptying per cycle.
• Quick drain and testing:
  Press CTRL + ALT + L for a quick water drain without cleaning.
• Display and controls:
  The spraying overlay lets you see the progress, times, water and cleaner. Turn on the mouse cursor to move and resize it.
  You can change the keys in the controls menu.