Here is Tramline Automation for FS25, my first script mod for FS25. The tramlines from Precision Farming did not always convince me, so this script brings them automatically into all implements you can use as seeders.
You can run the HUD with the mouse after turning it on with an assigned key. That makes checking and changing the setup while working nice and direct.
Features
- Set Tramline Distance: Put in the working width of your sprayer or fertilizer spreader. Change the value with two assigned keys, or click the mouse buttons with the plus and minus signs.
- Rhythm: This shows how many passes you need for one working width of the sprayer or fertilizer spreader. In Semiautomatic mode, you can correct the current pass with + and – when needed. Check the help pages now available in the game through the ESC menu for this. The half pass belongs only on the second pass. If you use GPS and need a half pass, do it this way: make the first pass normally. From the second pass, set an offset of half the working width in the GPS menu. The details are explained further down under GPS Offset Mode.
- Mode: Pick a different active tramline automation mode with an assigned key, or click the selected mode with the mouse.
- Pause: This stops tramline creation and pauses the counter.
- Always: Tramlines stay active whenever the implement is lowered.
- GPS: GIANTS Steering Assist handles automatic track detection. Before starting, set a reference track with an assigned key.
- Semiautomatic: The count is made by raising and lowering the implement. The symbol behind it tells you if a tramline is being created right now.
- Enhanced Vehicle GPS: Automatic Lane Detection: This mode works with Enhanced Vehicle GPS only when an Enhanced Vehicle GPS course is active. If the current pass does not fit, change it with the plus and minus buttons.
- Courseplay: You can use this mode only when Courseplay is installed. Please read the help page for it.
- GPS Offset: Requirement: GPS mode. An even rhythm number means the first pass uses half the working width. Set the offset so the track does not start jumping. Use an assigned key, or click the + and – buttons beside the rhythm with the mouse. In GPS mode, those buttons are used for increasing or decreasing the GPS offset.
- Track Width: Check the configured tramline track width here. Match it to the track width of the crop care tractor with two assigned keys or the mouse plus and minus buttons. Smaller tractors have a narrower track width than larger tractors.
- Buttons:
- Tramline distance +/-: Increase or decrease the tramline distance
- CURSOR ON/OFF: Show or hide the mouse pointer
- Tramline Mode switch: Switch the tramline mode
- GPS reference Lane set: Sets the GPS reference track
- reference -½ lane or reference +½ lane: Move the GPS reference track half the working width to the right or left
- Track width +/-: Adjusts the track width from 1m to 6m
Changelog
- V1.7.0.0
GPS mode is fixed after one of the latest updates broke it, so it was not working as intended in some cases. There are now two GPS modes to use: the normal mode from before and GPS Auto mode. GPS Auto creates passes from the GPS course. It now works like Courseplay mode, but with the standard GPS. The Additional Game Settings mod received an adjustment too. If you choose a different color in that mod, the green color changes as well. - V1.6.0.0
Fix for SKY Agriculture Pack - V1.5.0.0
The Ridgemarkers auto mode is fixed, and the switching sequence now works correctly. Before, it did not switch at one with an odd number of lanes. The auto mode was also fixed in general for some Sowingmachine, since it sometimes did not switch at all. A new key lets you trigger a Tramline at any time in any mode with one key press. ATTENTION, you must deactivate it again with the key because it overrides all modes.
