





With this pack, you get 7 rotary lobe pumps, connectable hoses and a complete fluid transfer system for Farming Simulator 25. Pull water from lakes, rivers, tanks or MapFlood floodwater, move it where you need it, and pump it into vehicles, containers or other bodies of water. Setting up the transfer system and running the hoses gives you plenty to work with.
Features
- Rear three-point hitch
- Front three-point hitch
- Forklift skid
- Crane lifting frame
- Roll-off container pump station
- Depending on the model, the drive comes from the PTO or a diesel engine.
- You can pick up hoses one at a time, carry them, lay them out, extend them and connect them to each other.
- The hoses use their own physics, bend smoothly and have sturdy couplings.
- Blue = suction side
Red = pressure side - Supported sources include lakes and rivers, MapFlood floodwater, tanks and trailers
- Supported liquids include water, milk, slurry, digestate, liquid fertilizer, herbicide, diesel, AdBlue, oils and other liquids
- Fill vehicles, tanks and unloading points from the pressure side. Liquid can also run straight from a free hose end.
- MapFlood floodwater is correctly taken into account when you pump it out.
- Connect multiple pumps in series by linking one pump’s pressure outlet to the suction side of the next one.
- Activate all pumps and their flow rates are added together. That also lets you build longer transfer lines.
- Interactive Control
- Attach Implements Manually
- Realistic Exhaust Smoke
- Original GIANTS diesel sounds
- Freely selectable pump and hose colors
- Dedicated shop category: Water Pumps & Hoses
Specifications
- Roll-off container diesel tank holds 400 litres
- PTO pump operating range: 350 to 1,000 RPM
- Maximum suction height: 8.5 m
Controls
- Left Alt + 1/2: Start/stop engine
- Left Alt + 3/4: Turn pump on/off
- Left Alt + 5/6: Change RPM
- Left Alt + 7: Refuel diesel
- Left Alt + N: EMERGENCY STOP
- Left Alt + 8: Connect/extend hose
- Left Alt + 9: Connect/disconnect coupling
- Left Alt + 0: Stow hose
- Left Alt + V: Stow all hoses
Displays keep you informed about RPM, flow rate, pressure, vacuum and fuel level.





