



Universal Vehicle Sync lets you unload while driving, and it works with every brand. You drive the harvester in front, while the tractor and cart keep pace beside it under the unloading pipe.
Features
- There is a new “Vehicle Sync” shop option for tractors and harvesters from every brand. You can also retrofit it in the workshop
- When the harvester is within the configurable sync radius, its driver connects and controls the whole setup. The tractor driver can accept the request and sees a small info window
- The system handles steering and speed. The tractor steers, stops and reverses along with the harvester, keeping the same speed
- Keep driving and move the cart forward, back, left or right from either machine
- Steer, brake or accelerate in the tractor and the connection drops immediately
- Both machines show the grain tank and cart fill levels
- Set the side gap you want. The tractor keeps its distance beside the machine instead of driving into it
- Pick left, right or behind. Behind is useful for the headland, and the nearest tractor from the same group gets selected
- Set your own zero point by moving the cart into the position that suits you, then save it. You can also return to the default
- After a turn, path planning brings the tractor back beside the harvester on its own. It drives around trees, buildings and vehicles
- Hit pause and the tractor waits while you turn on the headland. Then it rejoins
- Use the fixed pipe to place the cart below a pipe that stays put and fill it where you want
- Sync groups let you decide in the menu which machines can connect with each other
- Move the control window around and use it with your mouse or keyboard
- You get a separate settings tab in the menu
- Every key binding starts preset, but you can change them in the controls menu. You can also switch their F1 menu display off
Default keys
Left Alt + G: control windowLeft Alt + V: mouse cursorLeft Alt + Y: connect / accept / disconnectLeft Alt + arrow keys: move the cartLeft Alt + O: change sideLeft Alt + I: reset positionLeft Alt + C: pause / continueLeft Alt + L: fixed pipeLeft Alt + W: set zero pointLeft Alt + Q: default zero point
This is a fan-made mod inspired by real machine synchronisation systems. It is not affiliated with or endorsed by any manufacturer.





