



Jump into the Komatsu PC60 excavator and choose the 1990 or 1995 configuration. You get independent track controls plus TerraFarm support for digging, grading, and material handling, so there is plenty to do with it.
Both versions are ready to select in the shop. They each bring their own paint and decal treatment, along with progressive wear and washable dirt. The separate track controls make careful positioning and counter-rotation turns feel especially hands-on.
Features
- 1990: Yellow bodywork, white cab roof, white side stripe, navy panels, and black Komatsu lettering across the boom.
- 1995: Classic yellow finish with blue Komatsu lettering and vertical PC60 graphics along the sides.
- Run the left or right track forward or backward separately with the independent, isolated controls for precise positioning and counter-rotation turns.
- Use a standard keyboard, or play with your assigned controller driving inputs.
- Track pads, sprockets, and rollers animate individually.
- The boom, stick, bucket, and dozer blade all work.
- Watch the hydraulic cylinders, hoses, and bucket linkage animate.
- The included digging bucket picks up and unloads loose bulk material.
- TerraFarm works with both the bucket and the blade.
- Paint wear builds progressively, dirt accumulates separately, and track mud is washable.
- Open the cab door and service covers to access the detailed engine compartment.
- Animated cab controls, a working wiper, and load-responsive exhaust effects round out the cab.
Specifications
- Engine: Komatsu 4D95L diesel
- Power: 55 hp
- Engine speed: 800 – 2,200 rpm
- Maximum travel speed: 4.5 km/h forward and reverse
- Fuel capacity: 500 L diesel
- Bucket capacity: 2,000 L
- Base shop price: $38,500
- Included equipment: Digging bucket and front dozer blade
- Both paint schemes share the same mechanical specifications.
Independent Track Keybinds
Grab the numeric keypad to run the isolated tracks. (or re-key bind)
- Left track forward: Numpad 7
- Left track reverse: Numpad 1
- Right track forward: Numpad 9
- Right track reverse: Numpad 3
Combined track inputs:
- Numpad 7 + 9: Send both tracks forward.
- Numpad 1 + 3: Send both tracks backward.
- Numpad 7 + 3: Counter-rotate to turn right.
- Numpad 1 + 9: Counter-rotate to turn left.
Track directions use the forward direction of the undercarriage. Rotating the cab will not reverse the track assignments.
YOU NEED: TerraFarm





