



Pick an area in the construction menu and clear every tree and bush there in one go. The bulldozer still takes its own fee for each tree. When you play multiplayer, the server handles the clearing and charges the farm once, so you can mark out the space and get straight on with the result.
Features
- Since patch 1.25.1.0, the construction menu bulldozer, also known as demolition mode, removes standing trees for a fee, one click at a time for each tree. That makes preparing a wood lot for a new field or yard a job involving hundreds of clicks. Mass Tree Exterminator lets you clear the whole area you marked.
- Trees: every standing tree inside the area is taken away, stump included. The cost for each one is exactly the amount shown by the bulldozer.
- Bushes: map-painted bushes made with the construction menu plant brush are included too. Their cost follows the construction menu landscaping rate per m². Enter
mteBushesto switch bush removal off. - Your land only: trees and bushes belonging to another farm’s land remain, as do those on land that cannot be bought.
- One confirmation, one bill: before you confirm, check the cursor for the tree number, the bush size in m² and the total price.
How to use
Construction menu (Shift + P > Landscaping > Mass Tree Exterminator)
- 1. Left click where one corner should be, then left click the opposite corner. You will see the area on the ground. Trees that can be removed receive a red marker, and trees on other land receive a grey marker.
- 2. Left click again and the message “Bulldoze area ($…)” appears. Confirm it and the area is cleared. The outcome is shown beside the cursor.
| Input | Action |
|---|---|
| Left click | Set the first corner, set the opposite corner, then confirm the bulldozing of the area |
| Right click | Take away the last corner |
| Esc | Clear the marked area |
Console commands
| Command | What it does |
|---|---|
mteBushes |
Switch bushes on or off, with off removing trees only |
mteInfo |
Send the source of the tree fee, the bulldozer’s functions and the bush layers to log.txt |
mteTrace |
Switch logging on or off for each game bulldozer call, every event and every money change. With it on, remove one tree yourself using the bulldozer |
mteDebug |
Switch debug logging on or off |
Multiplayer
Here the server takes care of the work. It receives the area from the client, checks landscaping permission, the land and the farm’s money, then removes trees a batch per frame and removes bushes. After that, it charges the farm once and sends the answer only to that player. The farm comes from the player’s connection, not from whatever the client says.
Known issues
- The mod reads the tree fee from the game bulldozer as it runs. If an update changes how the bulldozer displays that fee, the cursor shows “tree fee estimated” and 250 is charged per tree. Run
mteInfo, follow it withmteTrace, remove one tree by hand with the bulldozer, runmteTraceonce more and send log.txt. - Only standing trees are removed, just as with the bulldozer. Earlier-felled trees leave their stumps and logs behind, while saplings with no wood yet are not removed.
- The mod has been tested in single player. In multiplayer, the server performs the removal the same way, but dedicated server use still needs confirmation.
- An area may measure at most 1000 m on each side.





