



In Farming Simulator 25, you get to handle the liquids yourself. Put the hoses where you need them, open the valves and fire up the pump. Move water, slurry, digestate and other liquids between your tanks, vehicles and storage in a hands-on way.
Features
- Connect hoses by hand, link them together when the route is longer and store them on vehicles that are equipped for it.
- You control the pumps and valves. That includes PTO rotary-lobe pumps, manual slide valves and the control panel for each transfer.
- One setup works both ways, so you can fill or empty with it.
- Leave a hose end open and liquid spills out, making slurry or digestate puddles. The host can turn spills off.
- Check a coupler to see the liquids it accepts and the liquids it supplies.
- Modders can add Fluid System support to their own vehicles and placeables with just a few XML lines.
Included equipment
- 8-inch suction hoses, available in 3 m and 5 m
- Suction hose with steel intake, 1 + 2 m
- PTO rotary-lobe pump
- PTO rotary-lobe pump with swivel elbows
- Wienhoff docking station
- Slurry storage connection with manual slide valve
V1.2.0.0
- The graphical tank overview has been redesigned. It shows the source, destination, flow rate and pump controls.
- You can run the manual and powered valves for both tanks straight from the overview.
- Configured front-arm pumps use separate controls. Start a booster and its assigned main pump starts too.
- Connection setup is now step by step, with a review page and 3D placement. Your settings stay in place when you switch connection types.
- German and English labels, help text and navigation are clearer.
- The 8-inch storage connection now handles water, slurry and digestate.
- Pump warnings stay hidden while you are driving unrelated vehicles.
- Pump and connection messages are clearer and no longer block the screen with dialog windows.
- Front-arm-to-tanker binding through the tractor works better. The connection section only displays the valves that matter.
- Hotkey operation is improved for playing without opening the menu. The F1 help menu shows which actions are available.
- A new side HUD overview covers tanks and pumps, and you can enable or disable it in the settings.
V1.1.1.0
- Vredo integrations were added, and the connection positions were corrected.
- Lua errors and outdated fluid selections are fixed.
- The pump overview is simpler, while the debug display is expanded, including in the shop.
- Press Tab to pick storage targets at a range of 50 – 100 m.
- With the new XML option
hoserot, hose rotation can be enabled.





