





You can put a proper onboard terminal right in your machine’s cab, just like the ones used by John Deere, CLAAS, Fendt, and Trimble. It reads real in-game data, so there are no made-up numbers getting in the way.
Once you are working a field, it can lift implements at the headland, turn for you, shut sections off, show coverage, and let you know when something is wrong.
How to get it
- Pick it up in the shop as another equipment purchase. When you buy or customize a tractor, combine harvester, or self-propelled machine, select “Agricultural Terminal: Yes” ($10,000).
- There is also an annual license of $2,000 per machine. The game charges it monthly as an operating cost, at $166.67, just like real guidance and section-control licenses.
- Your machines that are already in the game begin without a terminal. Just add one at the dealership from the customization menu.
Features
- Automatic headland turns: Reach the amber line and the terminal takes care of the sequence. It raises and switches off the implements, slows to the headland setting, turns toward the next pass with a U-turn or bulb turn, then lowers the implements. When guidance locks onto the new line, working speed comes back. Touch the steering wheel whenever you want control back.
- Headland navigation: The guidance system follows the corners on its own and slows at every corner. If the headland loop closes over ground that was already worked, cruise control stops and an alert appears.
- Field coverage map: Check a coverage map for every field, with overlaps marked red. You get a 3D view, heading-up or north-up orientation, and zoom controls. Your maps stay saved with the game save.
- Automatic section control: It works from the coverage map. Set 0%, 50%, or 100% overlap and adjust the look-ahead. The applied rate appears in L/ha or kg/ha.
- Harvesting: Keep an eye on grain tank fill level, yield, grain flow, header load, and the estimated time before the grain tank is full. Turn on REQUEST UNLOADING and the grain cart tractor gets an alarm and an alert with every combine’s fill level and distance, similar to Machine Sync.
- Tractor systems: The terminal brings together engine information, fuel level and remaining range, AdBlue, traction and wheel slip, differential lock, automatic PTO, and hydraulics. That includes lowering and raising speed, maximum lift height, and valve flow rate.
- Implement controls: The side view shows the real lift position, and the top view shows the sections. You can use raise, activate, fold, markers, reversing, covers, working depth, and baler controls.
- Work counters and history: Review area covered, working time, fuel consumption, L/ha, ha/h, distance, and average speed.
- Alert center with ACKNOWLEDGE: It warns about fuel reserve, AdBlue and battery, a full grain tank, parking brake, malfunctions, excessive wheel slip, low product levels, and more.
- Use it on any map with base-game or modded machinery. No XML files need editing.
- Set everything up from the terminal itself: size and position for every machine, inside the cab or outside, map appearance, touch controls that work only while stationary, beeps, and alarms.
- Terminal language: English, Español, Deutsch, Français.
- Multiplayer and dedicated servers work too. All players share work records, maps, and unloading requests. If contractor permissions are enabled, even a grain cart from another farm can receive unloading requests.
- Using Real Fuel Consumption, Realistic Diesel Start, Realistic Brakes, or Variable Working Depth? The terminal can show their data. These mods are optional.
Specifications
- Purchase price: $10,000.
- Annual license: $2,000 per machine.
- Monthly operating cost: $166.67 per machine.
Default key bindings
- Left Alt + T: Open/close the terminal
- Left Alt + C: Touch mode (mouse cursor)
- Left Alt + P: Next page
- Left Alt + H: Headland sequence
- Left Alt + X: ISB – implement stop
Tip
This terminal uses the game’s built-in Steering Assist for guidance. Make your guidance line in the field first, set AUTO HEADLAND to “Raise and Turn”, and then let the terminal run the headlands.
V1.2.0.0
NEW
- Reversing sensor: reverse your machine and the 2D and 3D monitor show green, yellow and red zones at 3, 2 and 1 m. The beeps speed up as you get closer. The ground and your own implement do not count. MUTE button. Setting “Reversing sensor”.
- Hitching aid: line up the tractor with its three-point arms and the loose implement shown with its real size, wheels, and drawbar. You see distance, side offset, arm height, plus a path that turns green when it reaches the hitch or tells you which way to steer. The view zooms in near the hitch. READY TO ATTACH and ATTACH button. Pick another page and the screen closes until the next manoeuvre.
- Unloading on the move: from the grain cart tractor, you can see the combines, their pipe, and where to drive, either “Move ahead X m” or “IN POSITION”. MATCH SPEED makes cruise control follow the combine. When AI drives the combine, it asks for unloading by itself at 80 %.
- Safeguard: if you get stuck at the field edge or in a headland turn for 3 s, the terminal raises the implement, cuts cruise control, sounds the alarm, and tells you to turn by hand.
- HEADLANDS button: choose 1 to 6 headlands for the game’s guidance, just like holding H.
- Brazilian Portuguese and Polish.
FIXES
- For diagonal field edges from 10 to 45 degrees, the headland now runs parallel to the edge, so there is no unworked strip.
- The turn checks the implement corners, keeping wide and trailed implements in the field, and it starts more smoothly. The headland lap turns only with “Raise, turn”.
- With combines whose header is switched on by the combine, for example MF 8570, POWER and ISB switch the threshing.
- 3D monitor: the interface always fits, it follows the cab with camera suspension, there is a new CANCEL button, and it recovers after a drawing error.
- Performance: the 2D map goes from 3.3 to 0.85 ms per frame, while the monitor goes from 45 to 14 ms per second.
- Errors are no longer hidden. They are written to the log.
UPDATING: replace the zip (same name, FS25_TerminalAgricola.zip). Work, maps and history are kept.
CHANGELOG 1.1.0.0
This lists the changes compared with 1.0.0.0, the previous version on KingMods.
Version 1.0.1.0 is included in this update as well, although it was not published separately.
NEW: 3D MONITOR IN THE CAB
- Install the new 3D monitor in the cab of any tractor or combine from the terminal settings, using the 3D MONITOR sheet. Put it on a console arm or a pillar mount. Vehicle XML editing is not needed.
- The monitor belongs to the machine and stays synchronized. In multiplayer, every player sees it.
- Turn on the ignition and it boots like a real monitor in 5 seconds: terminal name, “Starting system”, loading bar, and boot sound.
- The full terminal appears on its own large screen, including every page. It is made to be readable from the seat, with large bold text, large buttons, and fewer items per page.
- New setting “Monitor view”: Large (its own screen) or Like the 2D. New setting “Monitor text” (Normal, Large, Extra large) for the Like the 2D view.
- Use it alongside the 2D terminal, with the keys, or click it with the mouse in touch mode (Left Alt + C). Every touch makes a sound.
- Five physical buttons are backlit: screen off, day / night, home, settings, and next page.
- The GN REALISM brand lights up when the ignition is on. The matte screen is no longer washed out by the sun, and the light theme is dimmer.
- Move it with – and + buttons for near / far, left / right, down / up, tilt, turn, and roll. Choose a fine or coarse step, and hold a button to keep moving. IN FRONT puts the monitor in front of the view. Make it up to twice as large. The last position is remembered for each machine model.
- WORK page: the map takes up the full height and uses the same ground as the 2D view. The tractor sits low in the map and looks ahead, while the map moves smoothly every frame.





