





This mod brings dynamic water to deep tire tracks in waterlogged fields. The shape of the terrain controls where the tracks fill, while soil moisture, rain, snowmelt and frost conditions affect the water inside them.
Features
- There is a groundwater level under the field that follows the terrain, even across slopes.
- Water shows up in every lower part of the ground, including the tracks left by tractors.
- Think of each rut as a little basin. It fills until the water reaches the rut edges.
- As soon as soil moisture reaches 10%, local ground conditions raise the water level.
- Rain and snowmelt can push the water level even higher.
- When frost arrives, the water level freezes solid.
- If “Realistic Water & Soil Management” (RWSM) is installed, local soil moisture data from it is used.
- The native
ShallowWaterSimulationlets the water react to wheels and the in-game character. - Savegame: The current state stays saved inside your savegame.
- Multiplayer: Supported.
- Visuals only: Each client calculates the water effects locally.
- All vehicles included: The calculations use tire tracks from every vehicle, whichever vehicle created them.
- The mod is BETA 0.9.1.5, so it needs testing on different maps and with different soil conditions.
- For feedback, send a screenshot with the
log.txtfile. That is the most helpful combination.
Debug & Test Console
These console commands are ready for testing and troubleshooting:
witDebugwitFillwitMarginwitShaderwitFlipwitClearwitProbewitRwsmDump
Changelog
- V1.2.5.0
- The modDesc now uses descVersion 116, which is the current GIANTS standard, with TestRunner 0.9.24.
- V1.2.1.0
- The log error is fixed. I forgot the test runner yesterday evening, but it is clean again now. SORRY.
- V1.2.0.0
- New name: RutFlow – Dynamic water in field tracks, in every game language
- There is now an edge guard for stair-step jaggies and flickering that changes with the viewing angle.
- The track gets measured only behind the tire, so the quality stays the same at every speed.
- The tire moves water only where it actually touches it, sending it to the sides and making a bow wave at the front. Then the track fills again, helped along by rain, snowmelt and soil moisture.
- The track no longer fades out in front of the vehicle.
- The water visibility distance for tracks is now three times longer, at 750 m, and the water quality no longer switches.
- A bug that turned off foam and RWSM soil moisture is fixed, and the Flood Mod is detected reliably now.
- Approaching no longer switches the waves, and the reflection looks like it does in a rice field.
- Floodwater and external water cover the track cleanly, and moisture from the Flood Mod is supported too.
- Savegames and settings from the previous version carry over.





