Real Power Train V1.5.1.0

FS 25 Mods |
Real Power Train V1.5.1.0


Real Power Train makes CVT and transmission management feel realistic. You get transmission profiles for each brand, a hand throttle, power-split efficiency, engine-load behavior, hydraulic effects and multiplayer support. It gives you more to manage when you drive or set up your machines.

Features

  • Brand-specific realistic CVT setups are included. Fendt Vario and MF Dyna-VT have 2 manual ranges, field and road, and you can change them only while stopped. CVXDrive, Case IH, Steyr and New Holland, JD AutoPowr, CLAAS CMATIC, Deutz TTV, Valtra Direct and Kubota KVT use 4 automatic ranges with shifts that are almost unnoticeable.
  • Choose Auto for economy and low rpm at transport speed, or Power for a load limit and acceleration ramps 1-4. That is the engine and transmission management setup.
  • You can use the hand throttle with two rpm memories, A and B. The memories are saved with the savegame, just like on real tractors.
  • Power-split efficiency also matters here. The hydrostatic part has more losses, and that shows in pulling force and fuel use.
  • Put the PTO to work and the engine drops a little under load instead of being locked at PTO rpm.
  • Hydraulics raise engine rpm for tipping, loader work, linkage and folding. Afterwards, the rpm goes back to idle.
  • Open the own window with Left Alt + P. The Transmission tab gives you live rpm and target, engine load, efficiency, hydrostatic share and a range strip. In Settings, you find the modules, which vehicles, the CVT profile per brand and settings applied at once. The Panel tab lets you set on or off, text size and mouse movement.
  • The CVT module turns off by itself when CVT Addon, RealismAddon Gearbox or VCA is active.
  • Zasty HUD puts the range and hand throttle on screen. The panel hides as soon as the HUD is active.
  • Multiplayer support is included.

Keys

  • Left Alt + P: Real Powertrain window
  • Left Alt + Up / Down arrow: Hand throttle, hold

The keys above are the defaults. If the game or another mod is already using one, head to Options > Controls and choose the key you want instead, so there are no conflicts.

Changelog

  • V1.5.1.0
    New: CVT tractors now have an inching pedal. It works like the left “clutch” pedal on a real CVT tractor. The default key is Space. Change it in Controls under “Inching (CVT clutch pedal)” if you want. Hold the key and the wheels slow down smoothly until they stop. Let go and driving returns smoothly, with no jerk. Short taps let the tractor creep forward a little at a time. Only the wheel drive is cut, so engine rpm, PTO and hydraulics keep running. A baler, for example, keeps tying the bale while the tractor stands still. Inching overrides the accelerator and keeps speed and cruise control. It comes in handy with balers, front loaders, creeping up to a pallet and headland turns. While it is active, the HUD shows an INCH % chip. Fixes: New Holland tractors now run their own Auto Command transmission instead of showing Case IH’s CVXDrive. Long texts cut with “..” no longer break accented letters.
  • V1.4.0.0
    New: PTO by hand throttle. Switching on a PTO implement no longer locks the engine at PTO rpm. The engine stays at idle or at your hand throttle, and you choose the rpm yourself with the hand throttle or the A/B memories. Standard PTO, 540/1000, needs about 85-95% of the tractor’s max rpm. Eco PTO, 540E/1000E, uses about 70-75% and activates automatically for tedders, rakes and spreaders. Rotors and PTO shafts turn along with engine rpm. Drop below about 78% of the PTO rpm and the implement runs slower, with a “Low PTO rpm” warning appearing. The panel also shows a PTO % chip. This is on by default in Realistic mode and off in Arcade. You get a separate switch in Settings too, Left Alt + P. The AI helper keeps the game’s normal behaviour. Compatibility with Real Vehicle Dynamics: when both mods are active, keep speed and the game’s cruise control hold the speed again.
  • V1.3.1.0
    New: hydrostatic transmission. Combines, forage harvesters, telehandlers and other non-tractor machines with a continuous transmission are now recognised as hydrostatic. Their gears 1-4 change at standstill, rather than using a tractor CVT profile.
  • Fixed: CVT oil temperature no longer goes below about 40 °C while the engine is running. The oil cooler thermostat is simulated now, closed up to 42 °C and fully open at 60 °C.
  • The “cold oil” warning now appears below 40 °C.

Author: zasty chalk, ryankd233, Chronak28

Download


Farming Simulator 25 mods open the door to endless ways to customize and elevate your game. With free tools and tweaks that make every hour more immersive, you can shape your game exactly how you like. Try the FS25 Real Power Train V1.5.1.0 mod to give your game a fresh touch of atmosphere, and explore countless other options to keep upgrading your experience, all without limits.
Useful Information: How to install FS25 Mods | FS25 Guides | Complete Modding Guide | Download FS25 Game

Leave a Reply

Your email address will not be published. Required fields are marked *