





The Weidemann 4270 CX100 T is back after a long time, and now you can use it in Farming Simulator 25. The basic model started in FS13, then got extensively revised and further modeled for FS25.
Need to load, stack or transport something around your yard? This telescopic wheel loader is ready to be a versatile helper for all three jobs.
Features
- More polygons were added, and lots of details that used to be painted are now modeled.
- The speedometer is detailed and animated.
- The joystick moves along with the arm and tool, thanks to its matching animation.
- The lighting was rebuilt from the ground up and fitted with real light sources.
- The headlights use molded glass prisms, reflectors and luminous incandescent lamps.
- The glass materials on the rear, brake, indicator and reversing lights were revised.
- The hydraulic cylinders now come with rounder housings, chrome-plated piston rods, end caps, sealing rings and welds.
- The bearing eyes and bolts were given a more detailed design.
- Valve blocks, rigid hydraulic lines and angled fittings are now part of the setup.
- Eight hydraulic lines received refined couplings and revised hose routing.
- The connections for hose movement during arm and steering movements were revised.
- Hydraulic fitting and hose materials and textures were added and corrected.
- The wedge was redesigned with ribs, a real handle hole and a detailed holder.
- The folding roll bar keeps its original LS17 animation, is connected to “unfold/fold vehicle” and can still be used while the engine is switched off.
- The arm and implement connection was reworked, so attachments are dragged for significantly less time when you start a movement in the game.
- The current model was used to create and integrate a new mod image and transparent shop image.
Specifications
- Engine: Perkins 4-cylinder turbodiesel, 4.4 liters displacement
- Power: 101 hp / 74.5 kW
- Drive: Hydrostatic all-wheel drive
- Maximum speed: 20 km/h, or optionally 30 km/h
- Operating weight: approx. 7,000 kg
- Maximum bucket pivot point: 5.065 m
- Working hydraulics: 99 l/min at 235 bar
- Steering: Articulated steering
Development is ongoing, and further updates will follow.
V1.0.0.4
- Switch surfaces stay color-coded when switched off, with red hazard warning lights and green work lights.
- The accelerator and brake pedals, including their struts, were reworked, and the lower pivot points were corrected.
- The brake foot was shifted 3 cm closer to the pedal, with its movement adjusted as well.
- The exhaust is rounder, open inside and finished with a stainless steel surface.
- Four hydraulic connections, two compressed air connections and a seven-pin electrical socket were added at the rear, including lid movements and connection to the native hose system.
- The rear hitch point was lined up with the center of the bolt, and the trailer joint mobility was corrected.





