Universal Vehicle Sync V1.0.0.1

With Universal Vehicle Sync, unloading on the move works with every brand. You drive the harvester in front, while the tractor and cart stay alongside it under the unloading pipe and follow along.

Features

• “Vehicle Sync” is a new shop option for every brand of tractor and harvester, and you can also retrofit it in the workshop
• Once the harvester is inside the configurable sync radius, its driver connects and controls the setup; the tractor driver confirms the request and sees a small info window
• The system handles steering and speed, so the tractor keeps the harvester’s pace, steers with it, stops with it and reverses with it
• Either machine lets you shift the cart forward, back, left or right while both are moving
• The sync ends at once if you steer, brake or accelerate in the tractor
• You can see the grain tank and cart fill levels from both machines
• Set the side gap as needed, and the tractor keeps its distance instead of driving into the machine
• Pick left, right or behind; behind is used for the headland, and the nearest tractor from the same group is selected
• Move the cart into the spot you want, save it as your own zero point, or return to the default one
• After a turn, path planning brings the tractor back beside the harvester on its own and guides it around trees, buildings and vehicles
• Hit pause when you turn on the headland. The tractor waits there and rejoins afterward
• The fixed pipe keeps the pipe in place, letting you move the cart underneath and fill it where you choose
• Use sync groups in the menu to select which machines can connect with each other
• Move the control window around and use it with the mouse or keyboard
• The menu includes its own settings tab
• Every key binding starts preset, can be changed in the controls menu, and can be hidden from the F1 menu

Default keys:
Left Alt + G: control window
Left Alt + V: mouse cursor
Left Alt + Y: connect / accept / disconnect
Left Alt + arrow keys: move the cart
Left Alt + O: change side
Left Alt + I: reset position
Left Alt + C: pause / continue
Left Alt + L: fixed pipe
Left Alt + W: set zero point
Left Alt + Q: default zero point

Changelog

V1.0.0.1

• Fix for the F1 Menu