





Realistic Harvesting for FS25 makes harvesting feel more hands-on with dynamic physics driven by crop density, cutting width, moisture, machine horsepower, engine load, and mechanical calibration.
Features
- Engine load and speed follow the harvest: Your ground speed changes with the crop mass being taken in (t/h), the header width, and the vehicle horsepower. Push the engine too hard or run the wrong settings and real grain loss can happen.
- Every machine group is covered: Grain Combines, Forage Harvesters (chaff/silage), Root & Vegetable Harvesters (potatoes, beets, carrots, parsnips, spinach, peas), Cotton, and Sugarcane.
- Combine Calibration you can use in the cab (
RShift + K): Set Rotor/Drum RPM, Concave Clearance, Fan Speed, and Sieves for the crop you are harvesting. Getting those values right gives maximum yield and minimum loss. - Workshop Upgrade Packages (Tiers 1-4): Pick an upgrade for your combine directly at the shop.
- Level 1 (Standard): You handle the operation completely by hand.
- Level 2 (Sensor Kit): Calibration guidance appears as low / optimal / high hints.
- Level 3 (Yield Monitor): Watch real-time yield (t/ha, bu/ac), area rate (ha/h), and moisture telemetry.
- Level 4 (Opti-Harvest AI): Settings calibration and speed management happen automatically.
- AI & Courseplay compatibility: AI helpers and Courseplay workers use your saved profiles or the optimal calibrations automatically.
- Draggable HUD: Move the on-screen display wherever you want while it shows live Engine Load, Productivity (t/h, ha/h), Crop Loss %, and Moisture.
- Global Crop Profiles: Tune a crop once, save it, and have the profile load automatically across your combines and savegames.
- 3 Difficulty Modes (ESC Settings): Choose Arcade (relaxed), Normal (balanced), or Realistic (strict physical limits and penalties).
Bug Reports & Issues:
Discord & Suggestions:
Changelog
- V1.6.5.1
ADDED: The Combine Calibration Terminal was redesigned for Right Shift + K. It now uses a high-resolution tablet frame, radial telemetry gauges, rounded controls, unified hover states, and a saved crop configurations manager in the PROFILES tab. ADDED: 13 bindable vehicle input actions support external hardware control and virtual button boxes, including instant Tier 4 auto-calibration and stepping adjustments (±5%) for rotor speed, concave clearance, cleaning fan speed, upper sieve, lower sieve, and target engine load, with full multiplayer synchronization. ADDED: Engine load telemetry can be exported through the native getMotorLoadPercentage override, showing real-time RHM threshing load on in-cab dashboard gauges and external telemetry bridges. IMPROVED: When an AI helper takes over, hired workers from all electronic tiers (Tiers 1-4) immediately apply harvester parameters within their tier tolerance (Tier 4: optimal 0%, Tier 3: ±4%, Tier 2: ±10%, Tier 1: ±18%). Tier 4 also continuously auto-trims while tracking live field conditions. IMPROVED: Slider dragging now moves smoothly at sub-pixel level with 1% resolution, while window dragging uses deltas, pixel-snapped alignment, and magnetic docking. IMPROVED: Combine settings can now change only through manual adjustment, [LOAD PRESET], [AI AUTO-CALIB] (Tier 4), or active AI-worker driving. FIXED: The Yield Monitor HUD no longer overlaps the F1 input help menu when a savegame is loaded for the first time. OPTIMIZED: The calibration tablet chassis texture is now 1024×1024 BC3 (DXT5) with mipmaps, removing engine performance warnings. - V1.6.5.0
Added: The Public API Wear Provider (RHM_Api.registerWearProvider,RHM_Api.getWearProviderValue) lets mechanical wear and failure simulation mods, such as Realistic Mechanical Systems, provide real-time engine horsepower, including engine wear and tuning, extra processing power required by worn knives/rasp bars, and threshing wear loss up to 50%. If no external wear mod is installed, standard RHM physics runs autonomously with zero overhead. Improved: Direct Hopper Intake Loss Scaling now calculates crop losses at intake with (1.0 – lossRatio) during cutting instead of using post-tick fill-level subtractions. This completely removes negative bunker values and fill-level bounce from empty hoppers. Engine Peak Power Detection now reads live runtime peak horsepower directly from the engine’s VehicleMotor instance and supports powertrain upgrades and chip tuning. Low-Power Harvester Speed Curve: The speed governor floor is now 1.8 km/h, with an adaptive 3.5 km/h field entry speed for harvesters under 160 HP, for example FMŻ Bizon. HUD Visual Polish & Pixel Alignment: The HUD background now uses the authentic base game HUD background color (HUD.COLOR.BACKGROUND), blending with the F1 help menu. Cell spacing is polished with pixel-based alignment across 16:9, 21:9 UltraWide, and 4:3, while status badges ([A] 0.3%), sub-lines (-> 3.0 km/h, field progress), and colored indicator underlines remain. Fixed: The disappearing horizontal divider line now uses native 1-pixel screen height (g_pixelSizeY) and 0.25 opacity instead of subpixel hardcoded thickness, so separators remain visible with any F1 menu height or resolution. HUD Reset Console Commands:rhmResetHUDandrhmResetSettingsnow return the HUD to dynamic docking under F1 rather than pinning it to fixed coordinates. Arcade Power Telemetry Freeze: getPowerBreakdown diagnostic telemetry is no longer frozen in Arcade engine mode because breakdown telemetry is saved before the arcade bypass. Replace duplicate czech text in l10n_cs with authentic simplified chinese. - V1.6.4.3
Direct Grain Tank Intake Scaling: Losses from speed overload, calibration mismatch, slope, and moisture are now scaled right at the bunker intake. Legacy post-tick fill level deductions are fully removed, capacity counter jitter is prevented, and harvesters can fill cleanly to 100.0% without false premature full-tank stops. Dynamic Engine Power & Tuning Support: Load balance and speed governing now read live peak power, power multipliers, and powertrain configurations from the active motor instance, adapting automatically to custom engine upgrades and chip tuning. Fixed Attachment Runtime Error: A fatal arithmetic crash, attempt to perform arithmetic on nil value, during header lift/lower operations on custom harvester configurations has been resolved, restoring frame updates and normal cylinder animation speeds. Fixed Manual Driving Telemetry Stall: Engine load, crop throughput, and speed limits no longer stay at zero during manual player driving while working correctly under automated helpers. Improved Header Lowering Detection: Implement status checks now prioritize the native engine lowering state and safe joint descriptor validation, avoiding false disengagements on headers with rigid mounts or custom attacher controllers. Road Transit Work Mode Protection: Foldable header transport lock verification has been improved, preventing involuntary thresher activation or header lowering during road transit and automated waypoint transport. Optimized for Low-Horsepower Harvesters (< 160 HP): The speed governor floor is 1.8 km/h, letting compact and vintage harvesters move sustainably through dense, high-yielding crops without engine overload or severe crop loss spikes. Early engine horsepower resolution gives low-power harvesters a gentle 3.5 km/h field entry speed instead of the standard 5.5 km/h. Controller deadbands are scaled for crawl speeds, down to 0.08-0.10 km/h, so acceleration toward the target 80% engine load stays smooth without locking into underloaded speeds. Cleaned Telemetry Logging: Repetitive audio sample initialization notices during shop vehicle customization are suppressed, and savegame restoration messages are condensed into compact single-line summaries.





