Realistic Brakes V1.4.0.1

FS 25 Mods |
Realistic Brakes V1.4.0.1


Want braking that feels more like the real thing for your trucks and tractors? Realistic Brakes is made for that. It is a companion to Realistic Diesel Start (GN Realism), but you can also run it perfectly well on its own.

Features

  • Your parking brake now has to deal with the vehicle’s weight, trailers included, and with the slope. Leave a loaded truck facing a steep downhill when its weight is more than the brake can hold, and it rolls away just like in real life. Release the brake and your vehicle can roll on a slope even while you are sitting inside.
  • Stopping uphill is less awkward with the hill start aid. If the parking brake is released, the brakes hold for up to 3 seconds or until you accelerate.
  • The gear you choose matters for engine braking. Stay in a high gear and the vehicle keeps moving when you lift off. Shift down and the engine holds the vehicle back.
  • The exhaust brake, also known as the Jake Brake, can work automatically when you release the throttle, or you can trigger it yourself with the B key. The engine must be running, the throttle must be at zero and there must be enough rpm. The light turns green only during real braking.
  • Brakes heat at their own rate for every vehicle type, so each drive can feel different. Cars cool quickly. Tractors with oil-immersed brakes are difficult to overheat. A loaded truck going down a long descent can fade in a few minutes. Keep the brakes too hot for too long and the linings get damaged until you take the vehicle to the workshop. As soon as they begin heating up, a message tells you to use the engine brake or shift down.
  • Air-braked trailers do not simply roll when their air hoses are disconnected. They stay braked, like a real truck. Using FS25_manualAttach or Interactive Control means connecting the hoses yourself. With automatic attaching, the hoses connect on their own.
  • You get sounds for the exhaust brake, hot-brake squeal, the truck’s air parking valve or the tractor’s lever ratchet, and air exhaust when you let go of the brake pedal.
  • The HUD keeps things small and tidy. Lights sit beside the speedometer at the same size as Advanced Damage System’s. They cover the parking brake, engine brake and brake temperature, with a small number shown on trucks, plus a brake failure light that appears only when damage is present. There is one setup with ADS and a different one without it. The indicators never cover menus.
  • Multiplayer and Dedicated Server supported.
  • Translated into Spanish, English, German and French.

Settings

  • Available under ESC > Game Settings.
  • Engine brake mode.
  • Brake fade.
  • The mod’s parking brake.
  • Hill start aid.
  • Engine brake advice.
  • Show or hide the HUD.

Compatible with:

  • Advanced Damage System, which handles brake condition while this mod adds the heat.
  • Realistic Diesel Start, for air brakes.
  • Enhanced Vehicle.
  • Continue Driving After Exit.
  • CVT Addon.
  • AutoDrive.
  • FS25_manualAttach.
  • Interactive Control.
  • The AI helper is not affected.

Changelog

  • V1.4.0.1
    Multiplayer settings are now part of the savegame. They are stored with it, and the host or an admin on a dedicated server picks them in Game Settings. Those choices apply to every player, even players joining later. Previously, each PC had its own settings, which meant other players could not see them and host changes did not reach them. Existing savegames begin with the settings the host already had.
    The hill start aid no longer gives the “apply the parking brake” warning every time it releases. You see it only if the vehicle really starts rolling. Before this change, soft ground could keep the wheels chocked while the warning still appeared.
    With cruise control enabled, using the shuttle to change direction no longer leaves the tractor unable to drive off. The old issue came from the mod reading cruise control as a released throttle and opening the clutch. Cruise control now counts as throttle. Thanks Rems 834 for the report.
    Compatible with savegames from 1.4.0.0 and 1.3.0.0. Multiplayer and Dedicated Server supported.
  • V1.4.0.0
    This is the update after the published 1.3.0.0 release. It brings along 1.3.0.1 and 1.3.1.0, which were never uploaded.
    New, hill start aid: stop on an uphill while the parking brake is released, and the brakes remain on for up to 3 seconds or until you accelerate. Then the vehicle rolls. Use the parking brake when you want to keep it stopped.
    Now, with the parking brake released, your vehicle rolls on a slope even with you inside. A parked truck without its parking brake also rolls away. The engine brake cannot hold a vehicle that has stopped.
    Engine brake advice warns you during a descent when the brakes start heating up. It tells you to use the engine brake or shift down before fade begins.
    A small number now appears under the truck brake warning light, so you can see the brake temperature rise while driving.
    New, smaller brake failure light: it shows in amber beside the temperature light only after the linings begin to suffer damage.
    Fixed, dedicated server: the parking brake and engine brake were ineffective because the server did not know who was driving.
    When Advanced Damage System is installed, burnt brake linings can now be repaired at the workshop. ADS handles the brake condition, while this mod handles only the simulated heat.
    The AI helper no longer gives a jerk on slopes when you leave the parking brake released.
    Warning lights stay out of menus and dialogs, including the Real Fuel Consumption report.
    Compatibility, Continue Driving After Exit: the vehicle no longer applies its own brakes while that mod is driving it.
    Compatibility, CVT Addon: tractor wheels using its transmission no longer lock when you release the accelerator.
    Compatibility, AutoDrive: while you are seated and AutoDrive is driving, the mod no longer releases the brake at stops.
    You can turn off the mod’s parking brake, the hill start aid and the engine brake advice in Settings. The options are reduced: “Engine brake level” remains at 2, and “Trailer air hoses” stays permanently on, so that option has been removed. The warning lights are the same size as Advanced Damage System’s, with one position for ADS and another position without ADS.
    Trucks now have air exhaust when you release the brake pedal, louder after harder braking. Releasing the parking brake has a separate sound, while applying it is louder. The engine brake is quieter, especially inside the cab.
    Compatible with savegames from 1.3.0.0: no new game is required. Multiplayer and Dedicated Server supported.
  • V1.3.0.0
    New, trailer air brake hoses: air-braked trailers remain braked when their hoses are disconnected, matching a real truck. If no air is supplied, the spring brakes apply automatically.
    Works with FS25_manualAttach and Interactive Control: connect the trailer, then connect the air hoses, and only after that can the trailer move. Pulling off the hose also plays an air-release sound.
    Using the game’s automatic coupling system connects the hoses automatically, so there is no change there.
    With Realistic Engine Start, the trailer uses its own air tank and fills it from the truck’s air supply. Truck air pressure drops, an empty trailer takes almost half of the available air, and the compressor takes longer because it must fill both tanks. The trailer disconnects at 4.1 bar.
    When those trailer brakes apply, the wheels lock, just like a real truck with spring brakes engaged. The truck can barely pull the trailer, and only slowly under heavy load.
    The truck does not lose its own brakes because of the trailer. Trailers without air brakes, trailers pulled by tractors without air connections and trailers driven by a Worker continue working as usual.
    Try to drive with the trailer brakes locked and a message explains why it cannot move normally.
    You can disable this feature in the settings.
    New, parking brake sound: trucks play the air parking-brake valve sound, while tractors and other vehicles play the mechanical ratchet sound from the lever.
    Engine brake indicator: it stays dim or off whenever the engine brake is not actually retarding the vehicle, even if automatic mode is armed. Green appears only while the engine brake is actively slowing you down. Previously, it remained lit all the time.
    The HUD indicators now stay lined up beside the speedometer regardless of the HUD scale. At a scale other than 1, they could previously move away from the gauge. A vehicle excluded from Advanced Damage System now gets the correct layout without ADS.
    Compatible with savegames from 1.2.0.0: no new game is required. Multiplayer and Dedicated Server supported.

Author: GN Realism

Download


Farming Simulator 25 mods open the door to endless ways to customize and elevate your game. With free tools and tweaks that make every hour more immersive, you can shape your game exactly how you like. Try the FS25 Realistic Brakes V1.4.0.1 mod to give your game a fresh touch of atmosphere, and explore countless other options to keep upgrading your experience, all without limits.
Useful Information: How to install FS25 Mods | FS25 Guides | Complete Modding Guide | Download FS25 Game

Leave a Reply

Your email address will not be published. Required fields are marked *