Light Assistant V1.0.1.0

FS 25 Mods |
Light Assistant V1.0.1.0


Light Assistant takes care of beacon lights, driving lights, work lights and turn signals for you. The lighting changes with the time of day, the weather, the vehicle’s condition and what is happening while you drive.

Features

Beacon lights:

  • They come on automatically for relevant attached implements, loaded bale collectors and forklifts.
  • With harvesting machines, the beacons activate in transport position or once the crop container reaches 80% fill level.
  • The right beacon rotates or flashes at a slower speed.

Driving lights:

  • Daylight and weather conditions decide automatically when the lights switch on and off.
  • Darkness and poor weather are taken into account as well.

Work lights:

  • Front and rear work lights are controlled automatically from the attached implements and their working positions.
  • Switch-on and switch-off delays are adjusted so lighting changes happen naturally.
  • Hold the horn for at least one second and the front work lights flash briefly twice.

Turn signals and hazard lights:

  • On public roads, the turn signals work automatically using AI traffic splines and the steering angle.
  • Once the turn is finished, the turn signals switch off automatically.
  • Full braking on public roads activates the hazard lights automatically when braking starts at at least 40 km/h and braking intensity reaches 99% for at least 1.2 seconds.

Notes:

  • Every automatic function needs a running engine. AI helpers are excluded.
  • When you operate lights or signals manually, that takes priority over the matching automatic function.
  • Manually switching beacon lights or driving lights disables their automatic function until the next engine start.
  • Turn signals and hazard lights activated manually stay active as the priority until you switch them off again.
  • Automatic beacon lights are not triggered by trailers, weights or front loaders.
  • For harvesting machines, the fill-level warning always wins over transport-position activation. It starts at 80% fill level and stays on until the level is below 70%.
  • Transport-position beacon activation needs at least one foldable component. All foldable components have to be fully folded, and both the machine and header must be switched off. If the folding state is unknown, transport-position activation is blocked.
  • A missing or non-foldable header does not stop transport-position activation when every other condition is met. Harvesting machines without a crop container have no fill-level warning, and the unloading pipe has no effect.
  • After loading a saved game, the fill-level warning activates again only from 80% fill level onward.
  • Automatic switching includes the switch-on, switch-off and run-on delays for the individual functions.
  • Every player can enable or disable each module separately in the General Settings.

Changelog

  • V1.0.1.0
  • Beacon light control for harvesting machines was revised for transport position, folding functions and the fill-level warning.
  • The turn-signal cancellation delay is now 2.5 seconds.
  • The hazard-light switch-off delay is now 3 seconds.
  • Full-braking detection now uses 1.2 seconds, 99% braking intensity and at least 40 km/h when braking begins.
  • Headlight flashing is now two short flashes.
  • The internal mod structure was optimized, which reset some settings.
  • The mod description was updated.

Author: MeiQey

Download


Farming Simulator 25 mods open the door to endless ways to customize and elevate your game. With free tools and tweaks that make every hour more immersive, you can shape your game exactly how you like. Try the FS25 Light Assistant V1.0.1.0 mod to give your game a fresh touch of atmosphere, and explore countless other options to keep upgrading your experience, all without limits.
Useful Information: How to install FS25 Mods | FS25 Guides | Complete Modding Guide | Download FS25 Game

Leave a Reply

Your email address will not be published. Required fields are marked *