Aussie Fencing Build Kit BETA

FS 25 Mods |
Aussie Fencing Build Kit BETA


Build your own Australian Colorbond-style fence in Farming Simulator 25, right from the first peg. Lay out the line, drill the holes, set and concrete the posts, then build it up with bottom rails, individual sheets and top rails. It gives you a proper hands-on project to work through.

You get 15 fencing colours to pick from, and posts, rails and sheets can each use separate colours. Your construction progress, materials and curing times are saved, so the project keeps its progress.

Features

  • Buy and haul the materials, mix concrete in a usable wheelbarrow, and use purchased hand tools for all the different stages.
  • String lines are reusable.
  • Fence bays are all 2.4 metres long.
  • You can plan around corners.
  • Excavated dirt is scoopable.
  • Dismantling is done manually.
  • Single-player only.
  • TerraFarm is not required.

What you need

Get these tools from Jamo Modding Tools:

  • String-line reel
  • Concrete bucket
  • Cordless drill
  • Old Shovel
  • Mixing wheelbarrow

Pick up the materials from Jamo Modding Pallets:

  • Posts: 25, 50 or 75
  • Sheets: 25, 50 or 75
  • Combined rails: 25, 50 or 75 of each rail type
  • Cement: 25 bags per pallet

You will also need an owned water tanker containing water. Move your supplies over to the work area before you start building.

How to build your fence

  • 1. Place the starter peg.
    Open Construction → JAMO MODS → Placeables, then place a fence starter peg on your land.
  • 2. Plan the fence line.
    Close Construction mode and put away the string-line tool. Walk to the starter peg and press R to begin. Visit each corner or endpoint and press R to place it. The sections snap together into full 2.4-metre bays. At the final endpoint, press Ctrl + Enter to finish planning.
  • 3. Attach a string line if wanted.
    Equip the reel you purchased. Press R at a planned peg or post to connect the start, then go to another one and press R again. One reel handles one active span, up to 100 metres. When you want to reuse it, equip the same reel near either end and press R to rewind it.
  • 4. Drill the holes.
    Walk up to each marked post position and press R when prompted. Stay there until the drilling is done. You can collect the excavated material with a compatible loader or skid-steer bucket.
  • 5. Install the posts.
    Press R to take a post from its pallet, carry it over to a drilled hole and press R to fit it.
  • 6. Prepare the concrete.
    Take one cement bag from its pallet to the empty wheelbarrow and press R to empty it. Bring an owned tanker with at least 20 litres of water within 3 metres, then use the water prompt. Equip the Old Shovel and press R to mix the concrete.
  • 7. Concrete the posts.
    Equip the purchased bucket and fill it at the wheelbarrow. Carry it to a post that has been installed and press R to pour. Go back for another bucketful whenever needed. In this mod, one cement bag plus 20 litres of water gives three hole-filling pours.
  • 8. Allow the concrete to cure.
    Concrete takes 60 in-game minutes to cure. You can keep working on other holes while that happens.
  • 9. Fit the bottom rail.
    Take a bottom rail from the combined rail pallet and install it between two cured posts.
  • 10. Install the individual sheets.
    Carry one sheet from its pallet to the bay, equip your purchased drill and press R to install it. Do the same for the other sheets. Every sheet in that fence project must go in from the same side.
  • 11. Fit the top rail.
    When every sheet in the bay is installed, collect and fit the bay’s top rail.

Controls

Control Action
R Interact, take/return materials, start or stop work
Ctrl + Enter Finish the planned fence line
Ctrl + Backspace Undo the last planned corner
Ctrl + Delete Cancel the planning draft
Ctrl + X Toggle building/dismantling near a fence
Ctrl + R Take/return recovered materials near the original starting position
E Enter or exit the wheelbarrow
W/A/S/D Move and steer the wheelbarrow
C Change vehicle camera

Use the usual FS25 hand-tool controls to choose and equip the tools you bought. Your own key bindings may differ.

Helpful notes

  • Stay on foot and keep close to the component while you work.
  • Carry materials one item at a time. To put one back, return it to its source pallet.
  • Get out of the wheelbarrow before loading, mixing or filling the bucket.
  • Finish the fence planning before saving, because unfinished planning drafts are temporary.
  • Turn on dismantling mode and follow the prompts to take the fence apart, starting at the top rail.

YOU NEED: Store Category (Jamo Modding)


Author: JAMO MODDING

Download


Farming Simulator 25 mods open the door to endless ways to customize and elevate your game. With free tools and tweaks that make every hour more immersive, you can shape your game exactly how you like. Try the FS25 Aussie Fencing Build Kit BETA mod to give your game a fresh touch of atmosphere, and explore countless other options to keep upgrading your experience, all without limits.
Useful Information: How to install FS25 Mods | FS25 Guides | Complete Modding Guide | Download FS25 Game

Leave a Reply

Your email address will not be published. Required fields are marked *