



Version 1.0.0.5 arrives as a zip fix, with the whole pack packed again as a .zip file. You get Scania trucks, trailers, turntable trailers, ITRunner containers, plus equipment for working with wood. That gives you plenty to drive and set up across the pack.
Changelog
- Version 1.0.0.5
- The sounds when coupling and uncoupling have been revised.
- HKL sounds have been revised too.
- HVAC control is automated now and easier to handle.
- Drops land on the windshield, but not where the windshield wiper moves.
Features
- The trucks are built in Södertälje. Everything else is made up of commercial vehicles.
- The fender turn signals have been replaced completely.
- The standard grille was modified once more, and the color scheme was adjusted because graphical glitches could be visible from a distance.
- All vehicles and their attachments now use revised dirt textures.
- All trailers have standard FS25 sounds, including suspension movement and rattling while you drive.
- You can configure decorative lights integrated into the Scania logo and the trim strips on both sides.
- Both the Scania truck and the turntable trailer now have a flatbed body.
- The speedometer and radio are from my Scania. Pictures were taken of them and then installed in this model.
Pack contents
- 6 Scania trucks: HKL, tanker, Krone tarp body, semi-trailer, lumber transport, livestock transport.
- 7 trailers: livestock transport, low-loader, container transport, Fliegl dump trailer, Profiliner, lumber transport, and The Beast.
- 5 turntable trailers: livestock transport, tanker, Krone tarp body, timber transport, and the Hüffermann container transporter.
- 11 ITRunner containers: dump, grain, grain with tarp, tanker, timber, bales, grain & transport, manure spreader, forage, liquid manure, and the Kuhn feed mixer. The Kuhn has already been converted.
Wood Processing
- You get a Schäffer telescopic loader with a customizable design and rotating beacon.
- Compatible with front-loader attachments.
- There is also a TFK200 stump grinder and a log fork.
Hüffermann Trailer
- Choose the standard X (folding) option to move the container’s attachment point and unhitch the trailer.
- You can assign separate controls for hitching and unhitching, so moving the attachment point first is not necessary.
- The attachment point is used instead of the
DynamikMountAttacher, so you can select the container and fill the trailer at the silo. - The
DynamikMountAttacherwas not considered reliable enough. The Fliegl ZPS180 clearly shows why.
Recommended mods: Low-Loader Pack by HR Forst & Fahrzeugbau, as well as his Ponnse Skorpion.





