





You get three shop items in one mod here: the Chafer Interceptor 2.0 self-propelled sprayer, the spray shed and the water tank. Set them up together and the whole filling routine is ready to use.
Features
- Unfold the G-Series triple-fold boom and it drops itself to working height, with automatic levelling and suspension
- Pick front-wheel, all-wheel or crab steering for the way you want to drive
- The cab is based on the New Holland FR780 and includes a working Chafer DI4 terminal plus a Topcon X35 screen
- AgraGPS can be selected on the Topcon screen, but it needs
FS25_AgraGPS - PWM nozzle control is available as an option
- Use the induction hopper’s own fill screen to select a product and amount, or choose a field in the field calculator
- The mix is 20 % product and 80 % water, and the water cuts off on its own
- INDUCT, ADD WATER, WATER NOW and BUY are all on the hopper screen
- Every spray product works here, including products from mods
- RinsePro workstation with a clean clothing locker
- There are 21 Interactive Control points covering the workstation, hopper, lockers, toolbox, cab door, engine hood, steering column and cab switches
- Drive away and the access steps fold up. Get out and they come back down
- You also get a reversing camera, LED work lights, a detailed engine bay and air suspension
- Sounds include the Deutz engine, hydrostatic drive, pump and nozzles, boom fold knocks and the air compressor
- Dirt and wear
- IC control
- Field Calculator
- Multiplayer
- English and German
Chafer Interceptor 2.0
- Price: 199,000
- Stainless steel tank capacity: 5,000 l
- Choose 24, 30 or 36 m booms. The 30 m option adds +8,000 and the 36 m option adds +16,000 in the shop
- PWM nozzle control: +6,500
- Engine: 240 hp Deutz TCD 6.1
- Hydrostatic drive
- Maximum speed: 50 km/h
Spray Shed with Chemical Store
- Price: 64,000
- Park the sprayer inside after folding its boom
- 4.8 m wide door
- Store 3 chemical pallets, with an outside storage point for taking them back out
- The main door, store door and store shutter work
- Switches control the lights, with floodlights available at night
- Dirt and moss build up on the building, rain makes it wet, and snow settles on the roof
- Herbicide and liquid fertiliser carton pallets appear in the shop with made-up brands
- OBJECT Storage keeps your fill types and takes them automatically from the store while filling
Water Tank 15,000 l with Hose
- Price: 6,800
- Capacity: 15,000 l
- The tank refills from the mains at the water price. Use the stopcock to switch that off
- Its 15 m hose couples itself either at the tank or at the sprayer’s fill port
- Water goes into any vehicle that accepts it at 600 l per minute
- Level gauge and info box
Pallets of chemical cartons
- Herbicide: 620
- Liquid fertiliser: 800
- Made-up brands
- Works with ALL fill types
FILLING THE SPRAYER:
1. Start by putting the product pallets in the shed’s chemical store.
2. Leave the sprayer beside the water tank, no more than 60 m from the shed.
3. Open the workstation and lower the induction hopper.
4. On its screen, pick the product and amount, or pick a field, and press INDUCT.
5. Hook up the water tank hose and press ADD WATER. Once the mix reaches 20 % product and 80 % water, the water stops by itself.
TUTORIAL
REQUIREMENTS:
- Interactive Control (
FS25_interactiveControl), for the workstation, hopper, doors and cab switches. Without it the sprayer still fills at normal fill points. - Optional:
FS25_AgraGPSby Guner348, for the AgraGPS screen.
Changelog
- V1.0.1.0
NEW
Washout: press the new WASHOUT key on the induction hopper screen to empty the spray tank through the dump valve beneath it. The engine revs up for the pump, while a full tank takes about 3.5 minutes to drain. Press twice to start and once to stop. It shuts off by itself once the tank is empty. The tank contents are thrown away, and the sprayer cannot be switched on while the washout is running.Shop option: Slurry Pipe System coupling (+850). Fill the tank using SPS pipes, please test. Needs
FS25_SlurryPipeSystem.Shop option: See & Spray. Cameras along the boom spot-spray weeds and save herbicide. Needs Precision Farming.
Clipboard in the workstation: see your farm’s fields and their sizes on any map. When the fields do not all fit on the sheet, it turns over through pages.
Gas struts with sound fitted to both ends of the workstation lid
Exhaust flap lifts with the engine load
Hydraulic actuator added at the access steps’ hingeIMPROVED
Boom: smoother suspension and steadier levelling, so it no longer wobbles
Main tank: brushed stainless steel finish, like the real machine
Access steps: grated treads, like the real ones
Front boom rest rebuilt with properly welded joints
Rear mudguard support tubes: now round with domed end caps, and no longer stick outFIXED
Flickering surfaces at the bottom of the access steps, on the front-left cab platform and behind both front wheels
Flickering fill level bar on the RinsePro display and the DI4 sliderUPDATING
Just replace the zip. Your sprayer, shed and water tank stay in the savegame, and the new shop options start switched off.





