Mower Plus v1.1.0.8

Mower Plus gives grass mowers in LS25 normal wear, overload damage, and blockages to deal with. For supported equipment, it can detect the drums automatically and set spare part consumption to match.

Features

• While you mow, the blades, drums, and skids wear down.
• Push the workload too far and extra damage is caused.
• When a blockage happens, you have to clear it before you can keep working.
• Supported mowers, including base game machines and some modded equipment, get automatic drum detection. The script counts the drums and adjusts spare part consumption accordingly.
• If the automatic check does not work, the script falls back to predefined default values.
• Get the right spare part boxes from the “HMT Spare Parts” shop category.
• The HUD lets you see the equipment condition. You can move it, hide it, or change its size.
• Use Ctrl + Alt + Caps Lock for maintenance and blockage clearing.
• It is made for single-player use only. Multiplayer is not supported.

Features

• Jump into a vehicle with a supported grass mower and operate from there. If more than one compatible mower is around, the one you currently selected comes first. Otherwise, the first one detected is used. Close open menus before you begin.
• For the HUD, the default controls are Left Ctrl + Left Alt + 3 to show or hide it, and Left Ctrl + Left Alt + 4 to switch move mode on or off. Hold the left mouse button and drag the visible HUD where you want it. Camera and zoom inputs are disabled in this mode. Hiding the HUD, opening a menu, leaving the vehicle, or switching vehicles also takes you out of move mode.
• Change the HUD size with Left Ctrl + Left Alt + 5. Each press cycles through 50% → 25% → 20% → 75% of the speedometer width. Your position, size, and visibility choices are saved.
• The always-active maintenance binding is Ctrl + Alt + Caps Lock. It starts maintenance or cancels the current process, and no parts are consumed. You can still do maintenance while the HUD is hidden.
• First stop and turn off the mower. For replacing parts, place the needed spare parts boxes or pallets within five meters of the mower. They must belong to the same farm and have enough stock. You can use multiple boxes or pallets together for the required supply.
• A blockage gets cleared first. That takes eight seconds and uses no spare parts. Without a blockage, the group with the most wear is replaced over 20 seconds if enough replacement parts are available. You can service more groups afterward. Wear level decides how many parts are needed, and parts are used only when the process finishes successfully.
• Move the vehicle or turn it on and maintenance is canceled. During parts replacement, losing the required spare parts supply cancels the process too.
• You can remap the three HUD actions in Options → Controls. Maintenance also has a separate remappable action, though it has no default key binding. Existing user-defined bindings stay as they are. The fixed Ctrl + Alt + Caps Lock combination remains active whatever these settings are.
• For information, questions, or error reports, use the FBM support thread.

Specifications

• One spare part box contains 50 blades, 1 drum, or 20 skids.
• You can buy from 1 to 5 boxes at a time.

Changelog

• Version 1.1.0.8
• Moving the HUD now disables camera and zoom inputs.
• Mouse cursor handling is better when multiple “Plus” HUDs are active.
• Exiting “move mode” and releasing the mouse cursor now works better when you switch menus or vehicles.
• A mouse cursor issue on map exit has been fixed: the cursor for an open menu is no longer hidden.
• Nothing has changed for key bindings, wear-and-tear calculations, or spare parts quantities.
• This release is for single-player use, with multiplayer not supported.
• CVT Note: The reported error remains open and has not yet been reproducible. Should it occur again, please provide the full log.txt file along with a brief description of the situation.