You get a complete car wash for your vehicles and machines. Drive in, hit start, and the wash gets going.
Features
- The conveyor belt and guide rail pull your vehicle through automatically.
- There is a foam arch, roof brushes and side brushes that follow the vehicle’s shape, followed by rinsing and fan drying.
- The roller gate opens and shuts automatically.
- Use the card terminal to start or stop the wash, while its display shows how long the wash takes.
- Start the program again and the vehicle is pulled back to the beginning automatically, then washed once more.
- Your vehicles really become clean here, because dirt is removed during the wash.
Specifications
- Purchase price: 120,000
- Upkeep: 120 per day
- Building size: 5.4 m of inside width and approximately 6.9 m high.
- Space needed for the concrete slab with ramps: 8 m wide x 62 m long.
- Maximum vehicle size: 4.66 m wide with mirrors and header included, 5.35 m high above the belt, and 22 m long. Combinations are included.
- Multiplayer was tested on a server, but not yet with several players at the same time.
- PC/Mac only, no console.
Version 1.3.2.0
You may not redistribute the mod or remove and reuse its assets without permission.
V1.4.0.0
- NEW
AutoDrive support is here. Your AD vehicles stop at the AD destination on the lane, get washed, and continue by themselves. They can also continue to the parking spot when one is set in AD.
There is a new key called “AD: Drive to car wash”. Its default is Ctrl + W. Your vehicle drives automatically to the AD destination at the car wash. The destination name does not matter, and you can change the key in the controls settings.
You can now wash combinations up to 30 m long instead of 22 m. The building has not changed, so long combinations extend out at both the front and back.
The map icon is in the category “Other”. Select it and you are teleported to the terminal.
The wash brushes, top and side, and the dryer now have flexible spiral cables. They move when the equipment lifts and lowers.
New junction boxes sit on the side brushes, turned toward the tower, with a cable running from the tower to the box. - IMPROVED
Dryer: the silver rails have the new wash portal shape, plus more modern junction boxes and conduits running to the fans.
The cable mounts at the top of the portals and the dryer have been redesigned.
Foam arch: the pipes use clamps like the water arch, new brackets are installed, the supports have no gaps, and parts that stuck out have been removed.
The lift drive motors are gone because they no longer had a function. - FIXED
The dryer towers and posts had no collision before. They are solid now.
Flickering on the side brush carriages has been fixed. - RECOMMENDATION FOR AUTODRIVE
Put the AD destination, the holding point, exactly at the entrance by the roller door, a little farther inside the car wash, but not in front of the roller door. Your vehicle stops there and the wash starts reliably.
