AutoDrive course for Bergblick (v1.0.5, 05/02/2025). All routes driven including farms, productions, sales points, biogas plant, field edges. For small/medium vehicles. Cornering speed: 60%. With legend and notes. AutoDrive course for the “Bergblick” map, version 1.0.5 from May 2nd, 2025.
Retracted areas:
– Two-lane and single-lane roads
– Field paths as a secondary route
– Production and sales points
– Biogas plant
– Two courtyards
– Field edge courses as a branch route
Legend for route points:
= Loading the trailers
= loading/unloading
(man) = manual loading/unloading
(F) = Target point on the field
EK = purchasing point
VK = point of sale
(Solo) = Use without attachments or trailer
Pal. = pallets
Bal. = bale
RWD = Reverse
(Gate) = The gate must be opened
(Z) = field is fenced
Notes on use:
– Set corner speed to 60%
– Select the nearest field exit for downhill drivers
– Small to medium sized vehicles recommended as some production and sales locations are very tight
Driven in with:
– Steyr Absolut 6280 CVT and Fliegl ASW 271
– Fendt 728 Vario and two Brantner Z 18051/2 XXL Power Flex
– Steyr Absolut 6280 CVT and Kaweco Profi II + Bomech Multi Profi 21/15
– Lindner Lintrac 130 and Lizard MKS 8
– Mercedes-Benz Actros L 1863 with Krampe SKS 30/1050 (not recommended)
Tested with:
– Fendt 5275 C SL and Fendt FreeFlow 25 FT
– Steyr Absolut 6280 CVT and Fliegl ASW 271
– Fendt 728 Vario and two Brantner Z 18051/2 XXL Power Flex
Folder structure of the production and sales points:
– 04.01 = KVA = potato processing plant
– 04.02 = GTM = grain mill
– 04.03 = SPN = spinning mill
– 04.04 = ZKF = sugar factory
– 04.05 = SGW = sawmill
– 04.06 = KSF = Cannery
– 04.07 = ZMW 1 = cement plant 1
– 04.08 = ZMW 2 = cement plant 2
– 04.09 = BAK = Bakery
– 04.10 = MGH 1 = Medium Greenhouse 1
– 04.11 = MGH 2 = Medium Greenhouse 2
– 04.12 = GGH 1 = Large Greenhouse 1
– 04.13 = GGH 2 = Large Greenhouse 2
– 04.14 = FLR = butcher shop
– 04.15 = MLK = Dairy
– 04.16 = BGA500 = biogas plant 500kW
Notes:
– For the “Farmhouse 2” and “Farmhouse 3” sales points, fields 50 and 51 must be purchased
– The wedge silos of the BGA500 cannot be filled automatically because there is not enough space in front of them
– The hall gate at yard 2 (ball storage) must be opened. AutoLoad unloading takes place on the right, loading on the left or manually
– At Court 1, the workshop can be accessed separately through the hall gates. The exit from the silo for seeds/mineral feed is only possible through the middle of the hall. The middle lane must remain clear
Installation:
To use the courses, start a new save game or copy the “AutoDrive_config.xml” file into the save game folder of the “Bergblick” map.
