Real Power Train V1.4.0.0

FS 25 Mods |
Real Power Train V1.4.0.0


Real Power Train makes driving feel more hands-on with realistic CVT behavior, engine and transmission management, a hand throttle, power-split efficiency and hydraulic load simulation. You can also use it in multiplayer.

Features

  • CVT behavior depends on the brand. Fendt Vario and MF Dyna-VT give you 2 manual ranges, field and road, and you can switch them only while standing still. CVXDrive, Case IH, Steyr, New Holland, JD AutoPowr, CLAAS CMATIC, Deutz TTV, Valtra Direct and Kubota KVT instead have 4 automatic ranges with almost unnoticeable shifts.
  • For engine and transmission management, choose Auto, economy and low rpm at transport speed, or Power. There is also a load limit and acceleration ramps 1 – 4.
  • You get a hand throttle with two rpm memories, A and B. The memories save with the savegame, just like on real tractors.
  • Power-split efficiency means the hydrostatic part has more losses, which you notice through pulling force and fuel use.
  • With the PTO running, the engine drops a little under load instead of being locked at PTO rpm.
  • Hydraulics bring the engine rpm up for tipping, loader work, linkage and folding, then the rpm return to idle.
  • Use Left Alt + P for the own window. In the Transmission tab, you can see live rpm and target, engine load, efficiency, hydrostatic share and a range strip. The Settings tab lets you handle modules, which vehicles, the CVT profile per brand and settings applied at once. The Panel tab has on / off, text size and mouse movement.
  • If CVT Addon, RealismAddon Gearbox or VCA is active, the CVT module turns itself off.
  • Zasty HUD puts the range and hand throttle on screen. The panel hides while the HUD is active.
  • Multiplayer supported.

Keys

  • Left Alt + P: Real Powertrain window
  • Left Alt + Up / Down arrow: Hand throttle, hold

The keys shown here are the defaults. If the game or another mod has already claimed one, go to Options > Controls and pick the key you want so there is no conflict.

Changelog

  • V1.4.0.0
    New: PTO by hand throttle. Starting a PTO implement no longer locks the engine at PTO rpm. The engine stays at idle or at your hand throttle setting, and you control the rpm with the hand throttle or the A/B memories. Standard PTO, 540/1000, needs about 85 – 95% of the tractor’s max rpm. Eco PTO, 540E/1000E, uses about 70 – 75% and comes on automatically for tedders, rakes and spreaders. Rotors and PTO shafts spin with the engine rpm. Below about 78% of the PTO rpm, the implement runs slower and a “Low PTO rpm” warning appears. The panel now shows a PTO % chip. It starts on in Realistic mode and off in Arcade. You can also use its own switch in Settings, Left Alt + P. The AI helper keeps the game’s normal behaviour. Compatibility Real Vehicle Dynamics: when both mods are active, keep speed and the game’s cruise control hold the speed again.
  • V1.3.1.0
    New: hydrostatic transmission. Combines, forage harvesters, telehandlers and other non-tractor machines with a continuous transmission are recognised as hydrostatic now. They use gears 1 – 4 that change at standstill, rather than a tractor CVT profile.
    Fixed: CVT oil temperature no longer goes below about 40 °C while the engine is running. The oil cooler thermostat is simulated now, closed up to 42 °C and fully open at 60 °C.
    The “cold oil” warning now appears below 40 °C.
  • V1.1.2.0
    Fixed: rpm and speed needle jumping, especially on hills. Automatic ranges shift more calmly and remain in a range for at least 2 seconds. Engine rpm now follow the load smoothly instead of hunting.
    Improved: rpm no longer drop to “choking” values. Under load, the engine keeps enough rpm to pull. On the road, the minimum is about 1150 – 1300 rpm, depending on the tractor. At top speed, ECO stays around 1450 – 1500 rpm.
    New: Fendt VarioDrive. The Fendt 600/700/900/1000 now get one continuous, fully automatic range. The Fendt 200/300/500 still use the two manual ranges, I Field / II Road, changed at standstill.
    New: deceleration ramps 1 – 4 in the Transmission tab. They control how hard the engine brakes when you let go of the pedal, like a real CVT. Ramp 2 = game default.
    New: keep speed on tractors with a manual gearbox, requested by the community. It is off by default, so turn it on in Settings > “Keep speed on manual gearboxes”. On these tractors, only keep speed is added and nothing else changes.
    Debug log: it now shows more values. If something still jumps, turn on Settings > “Write values to the log”, drive up a hill and send me your log.txt.

Author: zasty chalk, ryankd233, Chronak28

Download


Farming Simulator 25 mods open the door to endless ways to customize and elevate your game. With free tools and tweaks that make every hour more immersive, you can shape your game exactly how you like. Try the FS25 Real Power Train V1.4.0.0 mod to give your game a fresh touch of atmosphere, and explore countless other options to keep upgrading your experience, all without limits.
Useful Information: How to install FS25 Mods | FS25 Guides | Complete Modding Guide | Download FS25 Game

Leave a Reply

Your email address will not be published. Required fields are marked *