





Realistic Mechanical Systems brings real mechanical systems into every Farming Simulator 25 machine. Parts wear down, fluids need checking, and breakdown warnings give you notice before something fails. You can use it with tractors, harvesters, trucks, and electric machines in single-player, multiplayer, or dedicated server games, so there is plenty to keep an eye on while you work.
Features
- Each machine can have up to 8 systems built from its actual parts, including everything from the injector to the PTO bearing.
- Warnings can show up as fluctuating engine speed, black, blue, or white smoke, turbo whine, and rattles that keep coming back.
- Ignoring a warning can let a breakdown spread. The engine may overheat, holding the starter too long can do damage, and bending the driveshaft too far can break parts.
- Keep the machine ready by checking fluid levels, topping them up, blowing out the radiator, and greasing every point with the grease gun.
- When a battery is flat, use jumper cables or the jump starter to get it going.
- Motorex, Motul, and FUCHS engine oils are available. If the engine uses AdBlue or a particulate filter, it needs the correct oil.
- At the workshop, you can get an inspection, maintenance, repair, overhaul, or painting service.
- Parts come as genuine, aftermarket, or used options, and the quote explains the costs line by line.
- A complete inspection shows which worn parts should be changed before they fail.
- New machines come with a 24-month manufacturer’s warranty. Failures from improper use are not covered.
- When the machine is sold, the buyer checks its service log.
- Engine oil is matched with the machine, with options from Motorex, Motul, and FUCHS.
- Soot builds up in the particulate filter, and the workshop has to clean it.
- You can replace worn parts before they fail.
- Engine remapping is available at the dealership.
- Under the Maintenance category, the shop offers oils, coolants, greases, and hand tools from RMS.
- The wear and breakdown systems are reworked so a new machine lasts, while one that is mistreated fails.
- Warranty, parts quality, quotes, greasing, starting, and harvesting components are all reworked.
- Workers can look after the machine, including when Courseplay and AutoDrive are being used.
- 27 languages are supported.
Compatible with:
- Courseplay
- AutoDrive
- Realistic Harvesting
For bugs and suggestions, use https://github.com/Squallqt/FS25_RealisticMechanicalSystems
Specifications
- New machines have a warranty lasting 24 months
- 27 supported languages
- Up to 8 supported systems
- Single-player, multiplayer, and dedicated server game modes supported
Changelog
- BETA 7
Changelog 1.0.0.0-beta.2:- Added required tractor power to implement info cards in the equipment menu.
- Added engine remapping (tuning) at the dealership.
- Added a “Maintenance” category to the shop, featuring oils, coolants, greases, and hand tools from RMS.
- Added engine oils specific to each machine, sourced from Motorex, Motul, and FUCHS. Engines equipped with AdBlue or a particulate filter (DPF) require specific oil. Using the wrong type will cause the oil change interval to be cut by up to half.
- Added particulate filter (DPF) ash accumulation. Regeneration cycles will occur with increasing frequency until the filter becomes full, restricting engine performance and requiring it to be cleaned in the workshop.
- Added the option for preventive replacement of worn parts identified during the most recent full inspection.
- Overhauled the wear and breakdown system. New machines rarely break down, whereas older or poorly maintained ones do so much more frequently. Overheating, holding the starter for too long, or over-angling a PTO shaft can cause components to fail.
- Overhauled low-fluid-level mechanics. If levels fall below the “MIN” mark, the pump may draw in air when operating on slopes. The oil warning light will flash, and components such as bearings or pumps will sustain damage.
- Pre-shift inspection correctly identifies low fluid levels and no longer confuses the air filter with the radiator.
- Warranty overhaul: covered breakdowns are repaired to a “standard” level using original parts. Damage caused by misuse, or the use of aftermarket or second-hand parts, is excluded, with the reason specified in the repair estimate.
- Parts quality overhaul: information cards display the wear, origin, and factory warranty for used parts. Low-cost maintenance may result in the installation of a defective filter.
- Repair method overhaul: “Standard” repairs replace the failed component and any collateral damage. “In-depth” repairs go further by overhauling the engine or cylinder head, including surrounding worn components. “Temporary” (field-expedient) repairs do not involve replacing any parts.
- Repair estimate overhaul: a consistent, detailed estimate format is used across all workshop pages, covering labor, parts, warranty status, and worn components identified during the latest inspection.
- Lubrication overhaul: only proper, thorough lubrication counts. Automated greasing systems are tracked via fleet alerts. Specific equipment, such as self-propelled forage harvesters and shredders, MacDon cutterbars, and onion planters, now requires active lubrication. Flatbed trailers are no longer greased using the same protocols as balers.
- Starting system overhaul: a dead battery can be jump-started using a loader’s jump-start function or jumper cables. In multiplayer, other players can hear the sound of a difficult engine start.
- Battery cart overhaul: the cart now remains stationary using its own brakes, and boarding it while using certain driving-related mods no longer triggers errors.
- Self-propelled harvester header overhaul: wear is now proportional to the volume of crop processed. Overloading triggers a warning light and slows down AI workers. A broken shredder no longer halts the harvesting process. The “Realistic Harvesting” mod is now fully integrated.
- Workshop accounting improvements: the summary now lists all maintenance performed, including full overhauls.
- An action that is cancelled no longer counts as having been completed.
- Fixed an issue where a machine left with its engine running would shut off automatically when the player moved too far away.
- Fixed an issue where AI workers and Courseplay would continue to push against an obstacle. They will now stop after 20 seconds of failing to move forward and be flagged as “blocked”.
- Fixed an issue where the engine temperature would spike upon re-entering a running machine when using certain dashboard mods.
- Removed the ability to queue multiple tasks at the workshop. Repairs or overdue maintenance are now determined based on the results of the service performed.
- BETA 6
https://github.com/Squallqt/FS25_RealisticMechanicalSystems/releases/tag/v1.0.0.0-beta.1 - BETA 5
Complete changelog: https://github.com/Squallqt/FS25_RealisticMechanicalSystems/releases/tag/v0.13.0.0
Complete changelog: https://github.com/Squallqt/FS25_RealisticMechanicalSystems/releases/tag/v0.13.0.1





