Real Power Train V1.3.1.0

FS 25 Mods |
Real Power Train V1.3.1.0


Real Power Train makes driving feel more hands-on with realistic CVT behavior, engine and transmission management, hand-throttle control, power-split efficiency, and hydraulic load effects. You can use it in multiplayer too. There is also a configurable transmission window and panel, so the important details are right there while you drive.

Features

  • The CVT setup depends on the brand. Fendt Vario and MF Dyna-VT have 2 manual ranges, field and road, and you can change them only while stopped. CVXDrive, Case IH, Steyr, New Holland, JD AutoPowr, CLAAS CMATIC, Deutz TTV, Valtra Direct, and Kubota KVT have 4 automatic ranges with almost unnoticeable shifts.
  • Choose Auto for economy and low rpm at transport speed, or Power for a load limit and acceleration ramps 1-4. That is the engine and transmission management.
  • You get a hand throttle with two rpm memories, A and B. The savegame remembers them, just like a real tractor would.
  • Power-split efficiency includes more losses in the hydrostatic part. That changes the pulling force and fuel use while you work.
  • With the PTO working, the engine drops a little under load instead of staying locked at PTO rpm.
  • Hydraulics raise engine rpm for tipping, loader work, linkage, and folding. Once the job is done, the engine returns to idle.
  • Press Left Alt + P to open the own window. The Transmission tab gives you live rpm and target, engine load, efficiency, hydrostatic share, and a range strip. In Settings, you can handle modules, managed vehicles, and the CVT profile per brand, with changes applied at once. The Panel tab lets you set on or off, text size, and mouse movement.
  • If CVT Addon, RealismAddon Gearbox, or VCA is active, the CVT module turns itself off.
  • Zasty HUD puts the range and hand throttle on screen. The panel hides while the HUD is active.
  • Multiplayer supported.

Controls

KEYS (default)

  • Left Alt + P: Real Powertrain window
  • Left Alt + Up / Down arrow: Hand throttle, hold

Those are the default keys. If the game or another mod already uses one, head to Options > Controls and choose the key you want instead, so there is no conflict.

Changelog

  • V1.3.1.0
    New: hydrostatic transmission. Combines, forage harvesters, telehandlers, and other non-tractor machines with a continuous transmission are now recognised as hydrostatic. Gears 1-4 change at a standstill on these machines instead of using a tractor CVT profile.
    Fixed: with the engine running, CVT oil temperature no longer drops below about 40 °C. The oil cooler thermostat is simulated now, closed up to 42 °C and fully open at 60 °C.
    The “cold oil” warning comes on below 40 °C.
  • V1.1.2.0
    Fixed: rpm and speed needle jumping, especially uphill. Automatic ranges shift more calmly now and stay in a range for at least 2 seconds. Engine rpm follow the load smoothly instead of hunting around.
    Improved: rpm do not fall to “choking” values anymore. Under load, the engine keeps enough rpm to pull. On the road, the minimum is about 1150 – 1300 rpm, depending on the tractor. At top speed, ECO stays around 1450 – 1500 rpm.
    New: Fendt VarioDrive. The Fendt 600/700/900/1000 now run with one continuous, fully automatic range. The Fendt 200/300/500 keep two manual ranges, I Field and II Road, and you change them at a standstill.
    New: deceleration ramps 1-4 are available in the Transmission tab. They control how hard the engine brakes when you let go of the pedal, like a real CVT. Ramp 2 = game default.
    New: keep speed on tractors with a manual gearbox, requested by the community. It starts off by default. Turn it on in Settings > “Keep speed on manual gearboxes”. On these tractors, only keep speed is added, so nothing else changes.
    Debug log: it now displays more values. If something still jumps, turn on Settings > “Write values to the log”, drive up a hill, and send me your log.txt.
  • V1.1.1.0
    New: Keep speed, asked for by the community. Let go of the pedal and the tractor holds the speed it had, like the drive lever on real CVT tractors. Accelerate to go faster, brake to slow down, then release again and the new speed is held.
    It works in forward and reverse. In forward, it uses the game’s cruise control. In reverse, the mod presses the pedal for you and adjusts it to hold the speed. It lets go when you accelerate, brake, use the cruise control keys, or when the tractor stops.
    When keep speed lets go, your own cruise control speed is given back.
    Use the window, Left Alt + P, and its Transmission tab to switch it on or off. The setting is saved per player in modSettings.
    The panel shows KS / KS active, while the window shows a chip for it.
    Multiplayer supported.
    IMPORTANT: Keep speed has NO default key. To switch it on or off while driving, bind a key in Options > Controls > “Keep speed (on/off)”.
    Keep speed works with CVT management. If it does not work on a combine, or another machine with a CVT, open the mod window with Left Alt + P, then choose Settings > Vehicles and select “All”. By default, only tractors are managed.

Author: zasty chalk, ryankd233, Chronak28

Download


Farming Simulator 25 mods open the door to endless ways to customize and elevate your game. With free tools and tweaks that make every hour more immersive, you can shape your game exactly how you like. Try the FS25 Real Power Train V1.3.1.0 mod to give your game a fresh touch of atmosphere, and explore countless other options to keep upgrading your experience, all without limits.
Useful Information: How to install FS25 Mods | FS25 Guides | Complete Modding Guide | Download FS25 Game

Leave a Reply

Your email address will not be published. Required fields are marked *