



Grassland Care Plus adds wear, overload damage, and maintenance to your grassland equipment in FS25. It puts Pickup Plus, Mower Plus, and Swather/Tedder Plus together in one mod, including HMT spare parts and multiplayer synchronization in beta.
Features
- Your everyday field jobs now cover more than mowing, tedding, swathing, and collecting. Wear and maintenance are part of all of them.
- Push things too far with an overload and extra damage follows. A blockage can also stop the work you are doing.
- With balers and forage wagons, the knives, pickup tines, and roller windguards all wear down.
- Mower wear applies to the blades, drums, and skids.
- Swathers and tedders wear on their tines, tine retainers or safety guards, and claw couplings.
- You can switch pickups, mowers, and swathers/tedders on or off one at a time in “General Settings” → “Grassland Care+”. The choices are saved with the savegame. In multiplayer, the host or server administrator handles them.
- Each module also has an “Easy Mode”. Turn it on to disable blockages for you and AI workers, while existing blockages are cleared too. Load, wear, and spare-part-based maintenance stay active.
- Pick the HUD text size you want locally, either large or small.
- The “Load” and “Wear” text is now larger in all four HUDs.
- You can still do partial maintenance when you have at least one spare part ready.
- The required part count is adjusted automatically from the number of components detected. If the system cannot detect a specific number, it uses the pre-set standard values.
Menu and “Easy” Mode
Pause the game, open General Settings → Grassland Care+, and set pickups, mowers, and swathers/tedders separately:
- Off: Your equipment uses the usual FS25 mechanics. The Grassland HUD, load limits, wear, and maintenance are disabled.
- Easy: Blockages are turned off for both you and AI workers. Changing to Easy also clears blockages that are already there. Load monitoring, wear, and maintenance with spare parts remain active.
- On: Every Grassland feature is active. If an AI worker gets a blockage while running a piece of equipment, the task stops and you get a notification. Clear the blockage, then you can restart the AI worker.
- Your module settings are stored in the savegame. In multiplayer, the host or server administrator sets them for all players.
Spare Parts and Component Maintenance
- Head to the “HMT Spare Parts” shop category to find the parts that fit.
- You can buy single boxes with selectable quantities, or pallets with ten units of one part type.
- The shop tells you what each item contains and how many boxes it has.
- To replace a component, stop, switch off the implement, and place the needed spare parts within a five-meter radius.
- Maintenance gets going when at least one suitable spare part is present.
- Need ten parts but only have five? Those five are installed, and a final notification tells you how many are still missing for the replacement.
- You do not need spare parts to clear a blockage.
HUD and Controls
Keep an eye on component wear and status through the HUD. You can set its text to large or small for your player in the Grassland menu.
- Left Ctrl + Left Alt + 3: Press this to show or hide the HUD.
- Left Ctrl + Left Alt + 4: Enter or leave move mode. Hold the left mouse button and drag the HUD wherever you want it. Press the same key combination again to exit. Camera and zoom controls are disabled during move mode.
- Left Ctrl + Left Alt + 5: Switch between HUD sizes of 50%, 25%, 20%, and 75% of the speedometer width.
- Ctrl + Alt + Caps Lock: Start or cancel maintenance, unless you have assigned another key binding to this action.
- All four actions can be changed at Options → Controls → Grassland Care+. If you save a custom keyboard or controller binding for maintenance, it takes the place of the default Caps Lock assignment.
Changelog
Grassland Care Plus 0.2.0.14, changes since version 0.2.0.8
- AI workers now end their task when a blockage appears and tell you why. Once you clear it, they can be started again.
- The multiplayer problem where AI workers did not stop during a blockage is fixed. The notification now reaches players in the farm that started the AI worker.
- Box and pallet shop icons have been refreshed, and their backgrounds are gone.
- The base-game KRONE BiG M 450 now uses a custom load curve: 60% load at 14 km/h and 80% load at 19 km/h. The maximum operating speed stays at 25 km/h.
- Grassland Care Plus now brings Pickup Plus, Mower Plus, and Swather / Tedder Plus together as one integrated mod.
Multiplayer Beta
To support collaborative development, the runtime scripts have been cut from 21 to ten. The aim is a more cohesive base for multiplayer gameplay.
CVT Menu Fix and Testing with DashboardLive Mods
During focused menu testing, Grassland Care Plus 0.2.0.6, CVT-Addon 2.1.0.0, DashboardLive 2.1.2.0, and DashboardLiveVanillaVehicles 1.1.0.1 were used, and the CVT menu opened successfully several times.
Without DashboardLive installed, opening that CVT menu creates a Lua callstack error. It is still unclear whether Grassland Care Plus interacts with it.
Support
Run into an issue? In the designated support area, share your complete log.txt file together with a short description of what happened.
Important
The three individual mods can still be used separately. Do not enable Grassland Care Plus at the same time as the corresponding individual mods!





